Product description:

RAVENOL ATF Dexron®-VI is an ATF (Automatic Transmission Fluid) oil based on the latest HC/HT hydrocracked oil technology, approved by General Motors for use in vehicles with automatic transmissions. The special formulation results in a doubling of service life compared to comparable automatic transmission oils. Dexron®-VI is a registered trademark of General Motors Corporation.

Application notes:

Recommended for all GM vehicles with Hydramatic automatic transmissions from 2006 onwards. It is fully backwards compatible with DEXRON®-III (H)-, III- and IIE applications. Follow the vehicle manufacturer's recommendations.

Properties:

Outstanding lubrication reliability under severe operating conditions
Longer gearbox service life, extended oil change intervals
outstanding resistance to oil sludge and deposit formation
Better oxidation resistance and thermal stability than DEXRON®-III (H) ATF
better resistance to foaming, resulting in smoother switching and less wear on bearings, bushings and gears
Excellent fluidity at low temperatures
even switching, optimum friction properties
prevents clutch wear in torque converters
longer oil and clutch life, enables soft shifting at low temperatures
Better fuel economy and torque transmission than DEXRON®-III (H) ATF
improved shear resistance

Quality class / Approvals / Specifications / OEM no:

Quality class:
Dexron®-VI
Approvals/specifications:
GM J-60331
MB 236.41
BMW 83 22 0 397 114, 83 22 2 167 720
GM 1940184, 93165414

Technical parameters:

Characteristics Unit Data Test in accordance with
Red
Density at 20 oC kg/m³ 838 EN ISO 12185
Viscosity at 40 oC mm2/s 29.1 DIN 51 562
at 100 oC mm2/s 6.0 DIN 51 562
Viscosity index VI 158 DIN ISO 2909
Flash point (COC) oC 218 DIN ISO 2592
Freezing point oC -54 DIN ISO 3016
TBN (total alkali number) mg KOH/g 2.0 DIN ISO 3771
Sulphated ash % mass 0.02 DIN 51 575

Notes:

All figures quoted are approximate and subject to commercially accepted fluctuations. All data corresponds to the current state of knowledge and our development. Subject to change. All references to DIN are for product description purposes only and do not constitute a guarantee. In problematic cases, please seek technical advice.