RAVENOL VSG 75W-90 is a universal gear oil designed on the basis of the highest quality fully synthetic base oils, specially refined and inhibited. The oil properties exceed current OE requirements for a product of this class. Guarantees excellent gearbox functioning.

Application notes:

It is designed for synchronised and non-synchronised manual transmissions, differential gears and power take-offs, for which an oil in accordance with API GL-5 or GL-4 is recommended. It is ideally suited for use in highly loaded drive axles.

Properties:

high additive reserves for long drain intervals as recommended by the manufacturer
best wear protection and transmission performance
stable lubricating film even under high loads
high oxidation resistance prevents oil thickening and deposit formation
excellent dirt-holding capacity, which means clean components even after very long oil-drain intervals
very good tolerance with elastomers to avoid leaks
very strong protection against rust formation, foaming and corrosion
neutrality towards non-ferrous metals
extremely low flow temperature of -57oC
Excellent EP (extreme pressure) properties
fuel economy, also in short-distance operation, even at low outside temperatures
absolute shear stability, remains within the viscosity range of fresh oil according to SAE 75W-90 after very long periods of use

Quality classification/Approvals/Specifications:

Quality class:
API GL-5, GL-4
Approvals/specifications:
BMW 83 22 2 365 987, 83 22 9 407 768, OSP, SAF-XO
VW G 052 145 A2, G 052 539 A2 G 052 911 A2
ZF TE-ML 12B, TE-ML 16F, TE-ML 17B
MAN 342 S1
IVECO
Volvo 97312, 97315, 97319
MB 235.11, 235.8
BOT 130 M, 328, 720
DAF LKW (Longer Replacement Intervals)
Ford 1045737, 5021033, WSD-M2C200-C
Land Rover TYK500010
Porsche 000.043.305.04, 958.341.536.00 (Torsen 2010-2018)
Renault LKW
Scania STO 1:0
MIL-L-2015D

Technical parameters:

Characteristics Unit Data Test in accordance with
Yellow
Density at 20 oC kg/m³ 839.8 EN ISO 12185
Viscosity at 40 oC mm2/s 108.8 DIN 51 562-10
at 100 oC mm2/s 16.8 DIN 51 562-10
Viscosity index VI 168 DIN ISO 2909
Brookfield viscosity at -40 oC mPa*s 47,000 ASTM D 2983
Flash point (COC) oC 224 DIN ISO 2592
Flow temperature oC -57 DIN ISO 3016
Copper corrosion test 1a ASTM D130
Sequence I at 24 oC ml/ml 0/0 ASTM D892
Sequence II at 93.5 oC ml/ml 0/0 ASTM D892
Sequence III from 24 oC to 93.5 oC ml/ml 0/0 ASTM D892

Notes:

All figures quoted are approximate and subject to commercially accepted fluctuations. All data corresponds to the current state of knowledge and our development. Subject to change. All references to DIN are for product description purposes only and do not constitute a guarantee. In problematic cases, please seek technical advice.